Garage doors are usually the most extensive moving on the house, and it is important always to check it and keep it working.
As a point of entry for you and your family, it is crucial to have your garage doors always working and running safely 24/7. And when it comes to garage door repairs, springs are most common, so when your garage door springs start to malfunction, you may need to know which one you need.
This article will see the garage door spring types and how to identify which one your garage door is using. This way, you already know what is wrong with your garage doors when you call for garage doors experts.
What type of springs do my garage doors use?
A most critical component of a garage door springs. Finding the right size and model can be a little hard if you don’t know much about garage door parts. But with this article, you can understand the different springs and find the one you need.
A broken spring is more common than you think. Maybe you never knew what a spring was until it broke. If your garage doors are not opening, this may be the reason.
The garage door moves on metal talks. You can see them on the garage walls. The oven to move them is provided by a spring or spring.
If you want to try to prepare or replace your springs, there are a few things you need to know before you start this project. Know the different types of garage door spring
Before trying to get your garage doors repaired, maybe you want to know what you need to replace in the first place. If this is your case, check what type of spring you need.
The two garage door springs categories are:
When your garage doors are opened, you can see them extending in this type of spring, and you can feel the tension. These springs are usually on a single garage door.
They are long and run parallel to the tracks of the door. Every time the door moves, the extension spring stretches. Now, there are three types, open-looped, double-looped, or clipped end.
Open-looped extension springs
The most common type of spring. These springs don’t have a center torsion bar. That is the metal piece you can see on the garage doors. The open-lopped extension springs are weak. They rely on an open wire. If the wire breaks, the entire spring is broken and needs to be replaced.
Double-looped extension spring
These springs are similar to open loops, but they have a double opening in the end. This allows a center torsion bar to be placed in-between, which is twisted.
These springs tend to be stronger than open looped because they have more metal parts.
Clipped end extension springs
Extension springs with a clip at both ends – these clipping connect springs to the garage door. These tend to last longer and are used on garage doors that weigh more than 200 lbs.
They are fixed to their mounting brackets with screws or clips. The main advantage of clipped end extension springs is that they can be stretched and adjusted without removing them from their brackets or winding cones.
Horizontal / torsion Spring
These springs are horizontal, and there is no tension when the garage door is closed. When the doors are opened, you can feel some movement from these springs. These springs are usually used on double garage door setups. This type of spring is also used in sectional doors and roll-up doors.
A garage door can have from one to four torsion springs, depending on the model. There are four types: standard, early-set, steel rolling-door, or torque-master springs.
Standard torsion springs
Standard torsion springs are frequently found on residential garage doors. Not-so-heavy doors use this type of spring, only requiring one spring to function.
Early-set torsion springs
They are similar to standard torsion springs. Commercial doors usually use them. They are designed to get the door to a certain point and then spring out the rest of the way. This means there will be less stress on the rollers.
Steel rolling door torsion springs
They are similar to standard torsion springs, but they are wider and have more coils to handle heavier-weight garage doors. These springs are used in businesses and warehouses.
They are normally seen in commercial and industrial buildings. Generally used on rolling doors, but can be installed in a garage door.
Knowing how your garage doors work and what type of parts are not working to replace them are important to keep your garage doors working. Springs are a major element of any garage door, whether residential or commercial.
Is it safe to repair my garage door springs myself?
There are some common garage door repairs that you can do by yourself. But, if you see that your garage doors are still not working, maybe it is not good to keep trying to repair yourself.
If you are inexperienced in garage door spring repairs, it is probably not good to do it yourself. To be on the safe side, you should always have someone experienced, so it is recommended to call a professional.
If your springs are not working, you need to know what type of springs your garage doors use! We hope this article helped you identify your garage door springs.
Garage door parts are often difficult to repair by yourself because you don’t know what the problem is or don’t know what part is broken, so it is a good idea to get them fixed right away by a professional who does this type of work regularly.
If your garage door does not work correctly, a garage door repair homestead company can repair it fast and efficiently and have it fixed in no time.
Dimark is a garage door repair homestead company that offers a wide range of services you may need, from fixing a string to installing openers, repairing remote control units, and more.
Image by F. Muhammad from Pixabay